Make pretty marbled Christmas ornaments with ink and FIRE!
In today's postal service: Learn how to make these beautiful marbled Christmas ornaments – it'due south a fun Christmas craft for kids!
A few years ago my mom introduced me and my kids to the world of booze inks and Fire. We made pretty tile coasters and gorgeous framed fine art in just a few minutes using this fun and easy technique, and my kids accept been begging me to get our own alcohol inks ever since. When I ordered some porcelain ornament blanks for another project (that ended upward existence a huge fail) I realized it was time for our side by side alcohol ink project: marbled Christmas ornaments.
My kids loved this project! It'south tons of fun because at that place'due south actually no correct or wrong fashion to brand fired ink art: you get to drop different colors of ink on the surface and mix them with booze and it's always a bit of a surprise how it will turn out.
So there'south the burn down! Later adding ink and alcohol you lot get to calorie-free the ornament on fire. The burn quickly burns away the alcohol, causing the ink to blend and marble, leaving you with a very cool effect. Keep scrolling down to the video to run across exactly what I mean.
Please note that because this project involves fire it is all-time suited for school aged children or teens WITH developed supervision. Please read through the safety tips below the video before trying this project.
How to make marbled Christmas ornaments with alcohol ink
Supplies:
- Alcohol ink: That'south an affiliate link to alcohol inks on Amazon. I used the Tim Holtz make (I haven't tried other brands) which comes in packs of three inks for about $10. I purchased my inks at Michael'due south when they were on auction, and I got 2 packs considering it's nice to take 6 different colors. The inks are a bit of an investment for a kids' craft project, merely y'all merely need a few drops per ornament so you can use them over and over once more! My red ornaments were made using Wild Plum and Cranberry inks, and my green/teal ornaments were fabricated using Stream and Lettuce inks.
- 91% Rubbing Alchohol: Yous should be able to find this in the pharmacy section of just nearly whatever shop. Just make certain you lot are getting the 91%, non the lxx% or l% as neither of those will work as well.
- Porcelain Ornament Blanks: You lot can find these at Amazon (affiliate link) in a variety of shapes or you tin can get the round ones similar I used from Consumer Crafts. Yous may too be able to find them at your local craft store.
- Multipurpose Lighter: You'll want 1 of the lighters with a long nose and handle, similar the ones you'd use to light a grill. You can find these at whatever grocery shop or fifty-fifty the dollar store.
- Medicine dropper or other small container you can use to drib the alcohol onto the ornament.
Marbled Ink Christmas Ornaments Video
Watch this video to see how to make the ornaments (written instructions follow):
Pretty absurd, right? For this video I just did one pass of dropping ink + alcohol and then firing the ornament, merely yous tin experiment with adding more colors, adding more alcohol to blend the colors, and firing again and again until you like the expect. My kids spent about 10 minutes on each decoration, trying out different combinations and techniques. And if you feel like you've really messed one up – no worries! Just put some booze on a newspaper towel and utilize it to wipe all the ink off the ornament so y'all can start over. (Your fingers will become colored if you lot do this, so y'all might want to wearable gloves.)
Booze Ink Safety Tips
Please BE CAUTIOUS when working with alcohol and burn. Booze is highly flammable, which is why it burns abroad quickly and leaves a cool ink effect on your ornaments. I feel comfortable doing this project with my schoolhouse age children, simply just like teaching kids to light a campfire you lot MUST teach them how to be cautious. If your kids aren't one-time plenty to be responsible effectually burn down, they are too young for this project. Use your judgement with your kids and keep these safety tips in mind:
- Prep your work expanse: I used a large cookie sail covered in foil with a cooling rack on top of information technology. That protects your table or counter from the ink, alcohol, and burn down.
- Children they MUST be supervised during this project, and an adult should be the one lighting the fire.
- Make sure anyone who has long pilus has it tied back.
- Make sure to proceed the lid on the alcohol closed.
- If any alcohol spills, make clean it upward immediately.
- Be sure not to light an decoration unless all hands, faces, AND the alcohol dropper are moved away from it.
- Bank check advisedly to make sure the burn is completely out before handling the decoration. The flame tin can be hard to see, so use caution. If you lot fire your ornaments while they are on a cooling rack (similar I did) make sure to wait under the ornament to be sure the flame has burned out there as well.
- An developed should be the one to pick up an ornament after it'southward been fired. They cool down very apace and you tin can more often than not handle them right away, merely make sure an adult checks them commencement.
Basically, simply utilize common sense and Exist SURE to supervise kids.
Written instructions for marbled ink ornaments
Footstep 1: Prep your workplace. Cover a big cookie sheet with aluminum foil. So place a cooling rack on the foil. (Cooling rack is optional – it ensures that you aren't left with any wet ink on the underside of your ornament subsequently information technology's been fired. If yous don't want to apply a cooling rack, only have a few newspaper towels fix that you can transfer the ornament to later on it's been fired to blot any wet ink left on the underside.)
Step ii: Identify a porcelain ornament on the rack or cookie sail, and driblet ink on information technology. You don't need much ink; 5-ten drops will hands embrace the unabridged ornament. You can utilise all 1 color or a mix of colors. For the examples in this post, I used two colors for each decoration.
Pace 3: Drop on some alcohol. Please be aware that y'all don't need much alcohol at all – a few drops, or possibly upwardly to 1 ML if you are using a medicine dropper. First with less alcohol until y'all are familiar with how it will burn. The booze volition alloy your ink colors together, so you lot can experiment with lighting it correct away or waiting for a while before lighting to allow it to blend more than.
Step four: Using a lighter with a long nose, light the ornament on fire. Depending on how much ink and alcohol you have used, information technology will take a minute to a couple of minutes to burn. Be sure it has burned out completely before treatment. Annotation that if yous are using a cooling rack the burn may fireunder the ornament as well, so exist sure that burns out too before handling.
Add together a ribbon to your finished ornament to hang on a tree!
Remember, you can add more ink and more than alcohol and fire an ornamentation again and once more to get a different look.
If you want to see what else we've done with alcohol ink, visit these posts: Tile Coasters and Fired Alcohol Ink Art
And if y'all're looking for more than DIY Christmas ornaments, check out these posts:
35 Homemade Christmas Ornaments
Newspaper Strip Ornaments (using one-time scrapbook paper)
Cinnamon Ornaments kids tin can make
Wood Slice Snowman Ornament
Keepsake Photograph Ornaments
Source: https://www.itsalwaysautumn.com/make-pretty-marbled-christmas-ornaments-with-ink-and-fire.html
0 Response to "Make pretty marbled Christmas ornaments with ink and FIRE!"
Post a Comment